Hello!!!
Friends In this post i will teach you how to format usb flash drive
using Dos Comand. Manny times we need to format our usb drives, people
find it difficult so today reading this article you will be able to
format your USB very easily,lets see the steps by steps
1. Fist Click Start > Run, and type cmd in the box then Click OK
2. The command prompt window appears.
3. Type the following command:
format D:
Note: Replace “D:” with the letter of your USB Pen Drive.
You can use “diskpart” to list all drive letters.
4. If you want to format it as FAT32 then type:
format D: /FS:FAT32
5. After that type the above command, press Enter.
6. When it asks for pressing Enter again, just press it to confirm.
7.It will prompt you to enter a name for the drive, write it and hit Enter
8. Thats it you are all done by Now.
So by reading this article i hope you will be now easily able to format your USB flash dirve.
1. Fist Click Start > Run, and type cmd in the box then Click OK
2. The command prompt window appears.
3. Type the following command:
format D:
Note: Replace “D:” with the letter of your USB Pen Drive.
You can use “diskpart” to list all drive letters.
4. If you want to format it as FAT32 then type:
format D: /FS:FAT32
5. After that type the above command, press Enter.
6. When it asks for pressing Enter again, just press it to confirm.
7.It will prompt you to enter a name for the drive, write it and hit Enter
8. Thats it you are all done by Now.
So by reading this article i hope you will be now easily able to format your USB flash dirve.
