How to Configuration ADSL TP-Link router Internet

Today i'm going to show you how to configure your router using routing mode through the following steps. I assume that all necessary components are connected and working correctly. please follow the bellow instruction

1. Open your browser (any) and type 192.168.1.1 into the address bar. This is the default IP address of the TP-Link router.

2. A new window will open asking you to enter username and password.

 There is asked for user name and password please don't afraid because the user name and password is you will be see there back side of Router 

The defaults settings is  are here:

User Name : admin

Password : admin

Enter the above information and log in.

3. For first time users, Quick Start wizard may appear. Discard this and click on "Interface Setup".

After The following screen will appear.

4. There are Virtual Circuits from 0-7. Activate only PVC0 and deactivate others.

Again, return to PVC0 options from drop-down menu. Choose PPPoA/PPPoE in the ISP section.

6. Enter the information as shown in the image below except username and password. Here, you need to enter username and password provided by Nepal Telecom.

Save the settings.

This is it. You can now use  ADSL internet. Remember that, if connection is successful the Internet bulb on your router will be ON. Otherwise, there is still some problems. Let me know if this tutorial worked for you or not..